Canon imageCLASS LBP612Cdw Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 621

Canon imageCLASS LBP612Cdw Скачать руководство пользователя страница 9

Installation

1648-001

To use this machine safely and comfortably, carefully read the following precautions and install the machine in an

appropriate location.

Do not install in a location that may result in a fire or electrical shock

●

A location where the ventilation slots are blocked
(too close to walls, beds, sofas, rugs, or similar objects)

●

A damp or dusty location

●

A location exposed to direct sunlight or outdoors

●

A location subject to high temperatures

●

A location exposed to open flames

●

Near alcohol, paint thinners or other flammable substances

Other warnings

●

Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock.

●

Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign
substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock.

●

Do not use near medical equipment. Radio waves emitted from this machine may interfere with medical
equipment, which may result in malfunctions and accidents.

●

When installing and removing the optional accessories, be sure to turn OFF the power, unplug the power
plug, and then disconnect all the interface cables and power cord from the machine. Otherwise, the power
cord or interface cables may be damaged, resulting in a fire or electrical shock.

●

If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer.

Do not install in the following locations

●

The machine may drop or fall, resulting in injury.
- An unstable location
- A location exposed to vibrations

Other cautions

●

When carrying this machine, follow the instructions in this manual. If carried improperly, it may fall, resulting
in injury.

●

When installing this machine, be careful not to get your hands caught between the machine and the floor or
walls. Doing so may result in injury.

Important Safety Instructions

3

«
...
7
8
9
10
11
...
»

Содержание imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов