Canon imageCLASS LBP612Cdw Скачать руководство пользователя страница 547 | Manualshive

Страница: 547 / 621

Canon imageCLASS LBP612Cdw Скачать руководство пользователя страница 547

Viewing User's Guide

1648-0FJ

This section describes the marks, buttons, screens, and other items used in the User's Guide. The warnings and

cautions are also given in the "Important Safety Instructions" in the "Getting Started" included with the machine. See

also these instructions.

Marks

Cautions regarding safety, restrictions and cautions regarding the handling of the machine, useful tips, and

other information are indicated using the marks below.

Indicates a warning concerning operations that may lead to death or injury to

persons if not performed correctly. To use the machine safely, always pay
attention to these warnings.

Indicates a caution concerning operations that may lead to injury to persons if

not performed correctly. To use the machine safely, always pay attention to
these cautions.

Indicates an operation that must not be performed. Read these items carefully,

and make sure not to perform the described operations.

Indicates operational requirements and restrictions. Be sure to read these

items carefully to operate the machine correctly, and avoid damage to the
machine or property.

Indicates a clarification of an operation, or contains additional explanations for

a procedure.

Indicates useful functions or tips for using the machine.

Keys and Buttons Used in this Manual

Keys on the operation panel and buttons on the computer display appear in the following notation:

Type

Example

Keys on the operation panel

Settings displayed on the operation panel

<Timer/Energy Settings>
<Paper jammed.>

Buttons and other text interfaces displayed on the computer display [Preferences]

●

A case in which a user taps a button on the display for the touch panel model, and a case in which a
user presses a key on the operation panel for the black and white LCD model are described even
when their operations are the same. For example, the operation for displaying the <Status Monitor>
screen is represented by "Press <Status Monitor> (

)."

Appendix

541

«
...
545
546
547
548
549
...
»

Содержание imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов