manualshive.com logo in svg

Canon imageCLASS LBP162dw, Руководство пользователя

Поделиться
Скачать
Canon imageCLASS LBP162dw Скачать руководство пользователя страница 249

●

Press and hold the Back key. On the <Output Report> screen, print the consumables status report to
find out the cartridge name.  Printing Reports and Lists(P. 254) 

Procedure for Replacing the Toner Cartridge

When you replace the toner cartridge, simple instructions on the replacement procedure are displayed on the screen.

See the on-screen instructions as well as the following procedure.

1

Close the paper stopper, and then open the toner cover.

2

Remove the toner cartridge.

Do not shake or tilt the toner cartridge. Also, make sure to avoid applying shocks to the toner cartridge, such

as by hitting it against something. Doing so may cause the toner left in the toner cartridge to leak. Remove

the toner cartridge gently at the same angle as the slot.

3

Remove the new toner cartridge from the protective package.

1

Pull the tab of the protective package on a flat place.

Maintenance

244

Содержание imageCLASS LBP162dw






















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды