2-15
2
In
st
al
lin
g
th
e P
rin
te
r D
riv
er
(
C
an
on
A
d
va
nc
ed
P
rin
ting
T
e
ch
no
lo
gy
(C
A
P
T)
)
■
Windows 2000/XP/Server 2003 Plug and Play
The following is the installation procedure of plug and play using a parallel port under
Windows 2000.
Before you install the software, make sure you do the following:
• Connect the machine to your computer (
Set-up Instructions
).
• Turn on the machine (
Set-up Instructions
).
• Start up Windows 2000/XP/Server 2003.
5
The
Found New Hardware Wizard
dialog box appears. Click
Browse…
to select the driver
in the language that you want to install. For example, if your CD-ROM drive is drive D:,
browse to D:\English\Win2000, then click
OK.
If you use Windows XP/Server 2003, and your CD-ROM drive is drive D:, browse to
D:\English\WinXP (For Server 2003 the path name is the same as for Windows XP.).
Click
Next >
on
Driver Files Search Results
.
NOTE
Click
Yes
if the
Digital Signature Not Found
dialog box appears.
6
When the installation is complete, the following dialog box appears. Click
OK
to close the
dialog box. Click
Finish
on the
Found New Hardware Wizard.
Parallel Port Users
IMPORTANT
If other printer drivers are already installed on the parallel port (LPT 1, etc.) of the
computer connected to this printer, uninstall those drivers or select
File:
in the port
selection dialog to set them for file output before installing Canon iC D800.