Canon imageCLASS D1120 Скачать руководство пользователя страница 27

Страница: 27 / 305

xxvi

Laser Saf

Laser Safety

Laser Safety

This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product under the U.S.

Department of Health and Human Services (DHHS) Radiation Performance Standard according to the

Radiation Control for Health and Safety Act of 1968. This means that the machine does not produce hazardous

radiation.

Since radiation emitted inside the machine is completely confined within protective housings and external

covers, the laser beam cannot escape from the machine during any phase of user operation.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration

implemented regulations for laser products on August 2, 1976. These regulations apply to laser products

manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.

Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation
exposure.

The label is attached to the laser scanner machine inside the machine and is not in a user access area.

This machine is confirmed as the class 1 laser product in IEC60825-1:2007.

Содержание imageCLASS D1120


















































































































































































































































































































Результаты поиска

Содержание imageCLASS D1120

Отзывы:

Похожие инструкции для imageCLASS D1120

Бренды по названию

Популярные бренды

Canon imageCLASS D1120, Основное руководство по эксплуатации

Результаты поиска

Содержание imageCLASS D1120

Отзывы:

Похожие инструкции для imageCLASS D1120

Бренды по названию

Популярные бренды