Canon image RUNNER 3245, Руководство по началу работы, Страница: 90 / 180

Setting Up a Computer as a File Server 5-30
5
Using a TCP/IP Network
Setting Up a Computer as a File Server
To send data from the machine to a computer on your network, you need to specify the settings of
the computer for receiving data.
You can send data over a TCP/IP network to any of the following:
FTP server (Windows 2000/XP/Server 2003/Vista, UNIX, Linux, Mac OS X, imageWARE Document
Manager Gateway)
WebDAV server (Windows 2000 Server/2000 Professional/XP/Server 2003, UNIX, Linux, Mac OS X)
Windows shared folder (Windows 2000/XP/Server 2003)
Samba shared folder (UNIX/Linux/Mac OS X)
This section describes how to set up a computer as an FTP/WebDAV server.
For instructions on how to configure a Windows and Samba shared folder, see “Setting Up a
Computer as a File Server,” on p. 7-6.
Optional equipment is required to send data from the machine if you are using the imageRUNNER
3245/3235/3230/3225. For the equipment needed, see “Optional Equipment and System Requirements for
Connecting to a Network,” on p. 3-2.
Samba 2.2.8a or later is supported.
This section describes only the procedures for setting up a computer to receive data sent from the machine. To send
data from the machine to a server on the network, you must enter an address setting from the control panel. For
instructions on how to specify recipient address settings, see e-Manual > Send/Fax.
The following procedure explains a sample FTP/WebDAV server setup. Depending on your environment, the actual
setup procedure may differ.
•
•
•
•
•
•
•
•