Canon image Prograf iPF780 Series, Руководство пользователя

Страница: 73 / 648

6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the
L
Paper Source list.
8
Select the width of the loaded roll in the
M
Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm) .
9
In the
A
Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 .
10
Select the
C
Enlarged/Reduced Printing check box.
11
Click ISO A4 in the
G
Paper Size list.
12
Click
F
Scaling and enter 120 .
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
•
If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in the
upper-left corner. In this case, you can center originals
by selecting
E
Print Centered on the Layout sheet.
13
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ."
➔
P.161
Resizing Originals by Entering a Scaling Value (Mac OS)
Resizing Originals by Entering a Scaling Value (Mac OS)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
•
Document: Any Type
iPF780
Resizing Originals by Entering a Scaling Value (Mac OS)
User's Guide
Enhanced Printing Options
Printing enlargements or reductions
73