30
3
Place the document in the document feed tray.
IMPORTANT
• With the straight path, documents are ejected at the front of the
scanner. Do not place anything that will block output near the
document eject area. Also, install the scanner on a smooth
surface to enable documents to be smoothly ejected.
• When scanning multiple page documents that are fastened
together, such as invoices, place the documents so that the
edge that is fastened together is facing down.
Placing Cards
1
Set the feed selection lever and the eject selection lever.
Set the feed selection lever to the non separation position (upper
position). The feed selection indicator will light orange.
Set the eject selection lever to the straight path position ( ).
2
Adjust the document guides to fit the width of the card to
be scanned.
