Canon IMAGE FORMULA DR-7550C Скачать руководство пользователя | Manualshive

Страница: 22 / 68

background image

14

1.

Turning the Power ON and OFF

Use the power switch to turn the scanner ON and OFF, or if you are using a USB connection, you can set the USB-linked power
switch.

CAUTION

• After turning the scanner OFF, wait at least ten seconds before turning it back ON.
• If the scanner is connected via SCSI cable, always turn the scanner ON before turning the computer ON. If you turn the computer ON before

the scanner, it may not recognize the scanner properly.

About the Power Switch

The power switch is located at the lower left side of the front
of the scanner. Press the power switch to turn the scanner ON.
(See p. 18.)
Press the power switch again to turn the scanner OFF.

Hint

In the User Mode, if the tray position is set to a height other than the
lowest position, then the Document Feed Tray moves up and down
when the power is turned on. In this case, the Document Feed Tray
is lowered once to the lowest position and then moves to the
configured height. When the power is turned off, the Document
Feed Tray does not move and stays at the configured height. (See
p. 18.)

IMPORTANT

• When connecting the scanner to the computer using a SCSI

cable, be sure to turn ON the scanner first, and then turn ON the
computer. If you turn ON the computer first, the scanner may not
be properly recognized by the computer.

• After turning the scanner OFF, wait at least 10 seconds before

turning it ON again.

• If you will not be using the scanner for an extended period,

disconnect the power cord from the AC outlet for safety.

Power Switch

«
...
20
21
22
23
24
...
»

Содержание IMAGE FORMULA DR-7550C





































































Отзывы:

Нет отзывов

Похожие инструкции для IMAGE FORMULA DR-7550C

IMAGERUNNER 1670F

Бренд: Canon Страницы: 136

Бренд: CSL Страницы: 86

Бренд: Pandigital Страницы: 50

Scantrak RP-6120

Бренд: RCA Страницы: 25

Бренд: RCA Страницы: 25

7080C - DR - Document Scanner

Бренд: Canon Страницы: 112

7580 - DR - Document Scanner

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 83

5060F - Document Scanner

Бренд: Canon Страницы: 92

7876A003 - CanoScan LiDE 50 Color Scanner

Бренд: Canon Страницы: 16

700F - CanoScan LiDE

Бренд: Canon Страницы: 2

8400F - CanoScan Flatbed Scanner

Бренд: Canon Страницы: 36

5600F - CanoScan - Flatbed Scanner

Бренд: Canon Страницы: 59

600F - CanoScan LiDE

Бренд: Canon Страницы: 73

EtherNet/IP DS6 00 Series

Бренд: Datalogic Страницы: 54

Бренд: Baracoda Страницы: 36

Бренд: Ambir Страницы: 1

Бренд: NCR Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды