Canon i-SENSYS MF3010 Скачать руководство пользователя страница 207 | Manualshive

Страница: 207 / 236

Canon i-SENSYS MF3010 Скачать руководство пользователя страница 207

Attention (Replacing the Toner Cartridge)

030E-057

See "

Maintenance and Inspections

" in "

Important Safety Instructions

WARNING

Do not dispose of a used toner cartridge in an open flame.

This may ignite the toner remaining inside the cartridge, resulting in burns or fire.

When cleaning up spilled or scattered toner:

If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp
cloth in a way that prevents inhalation.

Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so
may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.

CAUTION

Precautions to take when you get toner onto your hands or into clothing

If toner gets on your hands or clothing, wash them immediately with cold water.

The toner sets onto hands or into clothing if you try to wash it with warm water. Once it is set, you can hardly remove the
toner stains.

Be careful not to scatter the toner.

Do not pull out the sealing tape forcefully or stop pulling the tape halfway, as this may cause toner to spill out.

If toner gets into your eyes or mouth, wash them immediately with cold water and consult a physician.

Precautions to take when lowering the scanning platform

Be careful not to catch your fingers.

IMPORTANT

About replacement toner cartridges

For optimum print quality, replace the toner cartridge with the Genuine Canon Toner.

Model Name

Supported Canon Genuine Toner Cartridge

MF3010

Canon Cartridge 725

Be careful of counterfeit toner cartridges.

Please be aware that there are counterfeit Canon toner cartridges in the marketplace.

Use of counterfeit toner cartridge may result in poor print quality or machine performance.

Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner cartridge.

For more information, see http://www.canon.com/counterfeit.

Shake the toner cartridge before replacement.

If the toner is not distributed evenly inside the cartridge, this may cause poor print quality.

Hold the toner cartridges properly.

When handling the toner cartridge, hold it properly, as shown in the illustration below. Do not stand it vertically or hold it
upside down.

㻞㻜㻣㻌㻛㻌㻞㻟㻢

«
...
205
206
207
208
209
...
»

Содержание i-SENSYS MF3010













































































































































































































































Отзывы:

Нет отзывов