manualshive.com logo in svg

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 116 / 308

Поделиться
Скачать
Canon i-SENSYS MF229dw Скачать руководство пользователя страница 116

4

4

4-54

4-54

Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Disconnecting the SADF Unit and the Reader Unit > Procedure

Disassembly/Assembly > Original Exposure/Feed System (SADF Model) > Disconnecting the SADF Unit and the Reader Unit > Procedure

Disconnecting the SADF Unit and the Reader Unit

 

■

Preparation

 

●

Duplex Model

1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the SADF Unit + Reader Unit (Refer to page 4-51).

 

●

Sinplex Model

1) Remove the Left Cover (Sinplex Model)(Refer to page 4-144).
2) Remove the SADF Unit + Reader Unit (Refer to page 4-51).

F-4-123

 

■

Procedure

1) Change the orientation of the Control Panel Unit [1] so that it is facing down.

CAUTION:

Be sure to put a piece of paper and place the Control Panel Unit [1] on it carefully so as 
not to damage it.

[1]

2) Remove the Harness Cover [1].
•  2 Claws [2]

2x

[1]

[2]

F-4-124

F-4-125

Содержание i-SENSYS MF229dw





















































































































































































































































































































Отзывы:

Нет отзывов