Canon HJ40E, Руководство по эксплуатации

Страница: 16 / 186

E14
Introduction
Basic Sequence of Operations
㻰㻵㻿㻼㻸㻭㼅
[Trk]OFF
Shtl
A 1 A 2
MENU IG: 50
A
Fr1P
Fr1P
IS STD IS STD
㻰㻵㻿㻼㻸㻭㼅
Press the Display switch.
Press the Display switch.
The display is now illuminated.
The display is turned off.
Changes are saved.
Use the control keys to complete settings.
1
2
3
4
Turn on the lens.
㻰㻵㻿㻼㻸㻭㼅
[Trk]OFF
Shtl
A 1 A 2
MENU
IG: 50
A
Fr1P
Fr1P
IS STD IS STD
Important
For Reference: Display appearance when restoring original settings
Restoring the Original
Settings
The original settings can be restored, in
the case of incorrect settings or if you
have tried some settings tentatively.
For details, see
“ Resetting Values ” in “ 3.
Operation in Basic Mode
”
or
“
4. Operation
in Full Mode. ”
Basic Mode
ResetAll
User
User:
B
y/n
Full Mode
ResetAll
User
User:
AllUser:
1
y/n
y/n
Note: For instructions on turning the lens on, refer
to the camera manual.
Note: The display turns off automatically after two
minutes if no control keys are pressed. (Auto
Off.) However, the display remains active as
long as the Fol. screen is shown. In this case,
it is only deactivated when you press the
Display switch.
Note: Any changes to settings are saved even if the
display is automatically deactivated, just as
they are when it is switched off manually.
When the display is deactivated manually,
changes to settings are saved and the display
is turned off.
However, if the lens is turned off while the
display is on, changes to settings may not be
saved.