133
Setting Network (SX80 II)
Conn
ec
tin
g the Projector to
N
etwork (SX80 II)
6
Click [Projector info] and enter the projector name.
• You can input 1 to 63 alphanumeric characters.
• The factory default is [SX80 MarkII].
7
Click [Location], enter the projector location, and click the [OK] button.
• You can input up to 63 alphanumeric characters.
• The factory default is blank.
8
Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network setting of the projector is now completed.
• Filter message:
it tells that the air filter has reached its replacement tim-
ing.
• Unknown:
it tells that an unknown error was occurred.
Make sure to install the SNMP manager program on your PC before using the SNMP
agent function.
Authentication and Encryption Protocols
SNMP V3 for the projector uses the DES-CBC for the authentication and encryption
protocols.
