Canon GX6000 Series Скачать руководство пользователя страница 330 | Manualshive

Страница: 330 / 403

Canon GX6000 Series Скачать руководство пользователя страница 330

Paper Is Smudged / Printed Surface Is Scratched

Paper Is Smudged

Smudged Edges

Smudged Surface

Printed Surface Is Scratched

Check1

Check paper and print quality settings.

Printout Results Are Unsatisfactory

Check2

Check paper type.

Make sure you are using the right paper for what you are printing.

Supported Media Types

Check3

Correct curl before loading paper.

When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. Rolling
this paper in the opposite direction to flatten it may crack the paper surface and reduce the print quality.

We recommend putting unused paper back into the package and storing it flat.

•

Plain Paper

Turn the paper over and reload it to print on the other side.

•

Other Paper such as envelope

If the paper corners curl more than 0.1 in. / 3 mm (A) in height, the paper may smudge or may not feed
properly. Follow the instructions below to correct the paper curl.

330

«
...
328
329
330
331
332
...
»

Содержание GX6000 Series




















































































































































































































































































































































































































Отзывы:

Нет отзывов