Canon GP series, Руководство пользователя

Страница: 338 / 420

338
8 5: Custom Controls
When you press the button assigned to this function, metering and AF
are executed.
*1: If you assign the [ Metering and AF start ] function to the < p > and <
A
>
buttons and add the function to switch to the registered AF point, you can instantly
switch to the registered AF point. To enable this function, press the <
B
> button in
step 3 on page 333. On the [ AF start point ] selection screen, select [ Registered AF
point ].
Registering and using an AF point
1. Set the AF area selection mode to one of the following: Single-point
Spot AF, Single-point AF, AF point expansion (manual selection,
surrounding points), or 61-point automatic selection AF. (Zone AF
cannot be registered.)
2. Select an AF point manually (p.71).
3. Hold down the <
S
> button and press the <
i
> button. A beep will
sound and the AF point will be registered. If the AF area selection
mode is not set to 61-point automatic selection AF, the registered AF
point will blink.
If [
2 4: Orientation linked AF point ] is set to [ Select separate AF
points ], you can register the AF point separately for the vertical
(camera grip at top or bottom) and horizontal orientations.
4. When you press the < p > button assigned to this function or
press the <
A
> button, the camera will switch to the registered AF
area selection mode and manually-selected AF point.
To cancel the registered AF point, hold down the <
S
> button and
press the <
O
> button. The registered AF point will also be canceled if
you select [ 5 4: Clear all camera settings ].
: Metering and AF start
When an AF point is registered, the following will be displayed:
• 61-point automatic selection AF:
HP
• Single-point Spot AF, Single-point AF, AF point expansion: SEL
(Center)/ SEL HP (Off-center)
When registered with SEL or SEL HP , the registered AF point will
blink.
COP
Y