Canon g3000 series Скачать руководство пользователя страница 761 | Manualshive

Страница: 761 / 852

Canon g3000 series Скачать руководство пользователя страница 761

ScanGear (Scanner Driver) Error Messages

If an error message for ScanGear (scanner driver) appears, check the error code and follow the
corresponding solution.

Error Code

Error Message

Solution

1

4

10

122

151

175

176

177

Error in scanner.
Turn off scanner and follow instructions in User's Guide.
Scanner driver will be closed.

• Make sure that your scanner or

printer and the computer are con-
nected correctly.

• Delete MP Drivers, then reinstall

MP Drivers from the Setup CD-
ROM or the web page.

Refer to "Deleting the Unnecessary
MP Drivers" for your model from
Home of the

Online Manual

for how

to delete MP Drivers.

• Your scanner or printer may be

damaged.

Restart the computer, then recon-
nect your scanner. If the same error
message still appears, contact the
service center.

140

Printer is in use or an error has occurred. Check status.
Scanner driver will be closed.

• Wait for the device operation to fin-

ish, then scan.

145

Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- Scanner is disconnected.
(It is disconnected from LAN, if using on LAN.)

Please check and try again.
Scanner driver will be closed.

• Make sure that your scanner or

printer is turned on.

• Delete MP Drivers, then reinstall

MP Drivers from the Setup CD-
ROM or the web page.

Refer to "Deleting the Unnecessary
MP Drivers" for your model from
Home of the

Online Manual

for how

to delete MP Drivers.

• Make sure that the selected appli-

cation source is correct. Refer to
the application's manual for details.

• Check the printer status.
• With USB connection, check the

connection of the USB cable and
reconnect as required.

• With network connection, check the

connection status and reconnect as
required.

• With network connection, specify

the scanner to use with IJ Network
Scanner Selector EX.

155

Cannot communicate with scanner.
Cable may be disconnected or scanner may be turned
off.
Check status.
Scanner driver will be closed.

156

Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- USB cable is disconnected.

Please check and try again.
Scanner driver will be closed.

157

Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- (If using Wired LAN connection) It is disconnected from
Wired LAN.
- (If using wireless LAN connection) Signal strength is

761

«
...
759
760
761
762
763
...
»

Содержание g3000 series





















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов