Canon g3000 series Скачать руководство пользователя страница 440 | Manualshive

Страница: 440 / 852

Canon g3000 series Скачать руководство пользователя страница 440

Initial Check Items (System Cleaning)

Before running

System Cleaning

, check that the printer power is on.

Then check the following items:

• When you ran

Nozzle Check

, were there areas where the print was smeared or unprinted areas?

• Did the condition not improve even after

Deep Cleaning

was run?

• Are the remaining ink levels insufficient?

◦ Visually check whether the remaining ink levels are insufficient.

If

System Cleaning

is run when the remaining ink levels are insufficient, it may trigger a failure.

◦ If you selected

All Colors

or

Black

for

Ink Group

, check that all remaining ink levels are at least

at the single dot position indicated on the ink tanks. (The color inks are consumed even if

Black

was selected.)
If you selected

Color

, check that the remaining ink levels for all color inks are at least at the single

dot position indicated on the ink tanks.

◦ If any remaining ink level is below the single dot position,

the ink to at least the single

dot position. However, if

Remaining Ink Notification Settings

is enabled, replenish all remaining

ink levels to the upper limit line indicated on the ink tanks, regardless of the

Ink Group

setting.

Start Print Head Alignment dialog box

This dialog box allows you to adjust the attachment position for the print head, or to print the current
setting value for the print head position.

Align Print Head

Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head.

Print Alignment Value

Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.

Print Head Alignment dialog box

To adjust the print head position manually, click

Align Print Head

in the

Start Print Head Alignment

dialog box, and perform the operations instructed in the messages. The

Print Head Alignment

dialog

box is then displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.

Preview Window

Displays the pattern of

Print Head Alignment

, and checks the position of the selected pattern.

You can also change the setting by clicking the pattern on the screen directly.

Select the Pattern Number

Compare the printed adjustment patterns, and enter the pattern number of the pattern with the
least visible streaks or horizontal stripes into the corresponding box.

Note

• If you do not know how to analyze the printed pattern, see

Aligning the Print Head Position

.

440

«
...
438
439
440
441
442
...
»

Содержание g3000 series





















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов