Canon G2000 series, Руководство по обслуживанию

Страница: 60 / 80

(60/80)
QY8-13EX-040
3-5. Special Notes on Servicing
(1) Ink absorber counter setting
Before replacement of the main PCB ass’y, set the ink absorber counter again.
Check the ink absorber counter value using the “D” value in the EEPROM information, and register it to the
replaced new main PCB ass’y. (The value can be set in 10% increments.)
When the ink absorber is replaced, set the ink absorber counter to 0% for whole replacement, or 30% for
partial replacement. For details, see 3-3, (4) Ink Absorber Counter Setting .
(2) Preventive replacement of ink absorber
To maintain a proper replacement frequency and avoid possible accidents such as ink leakage during
returning a printer to its owner, perform the following and replace the ink absorber even before ink
absorber becomes full:
How to judge:
Print the EEPROM information, and check the "D" (ink absorber counter) and the calculated ink absorber
life or the "DL" (ink absorber life) values.
Step 1: Is "D" 80% or more? (to avoid coming-back-to repair due to ink full in a short period of time)
Yes (80% or more) -> Replace the ink absorber.
No (less than 80%) -> Proceed to Step 2.
Step 2: Is the ink absorber life 24 or more? (to avoid ink leakage during returning the repaired printer to
its owner)
No (less than 24 months) -> Replace the ink absorber.
Yes (24 months or more) -> No need to replace the ink absorber.
How to know the ink absorber life:
Use the “DL” value in the EEPROM information.
Note: The ink absorber life is an estimated value calculated based on the user's printer usage.
How to read the EEPROM information print:
Installation date
Ink absorber life (months)
Last print date
Ink absorber counter value (%)
easyfixs.blogspot.com