manualshive.com logo in svg

Canon FAXPHONE L190, Руководство по обслуживанию, Страница: 461 / 511

Поделиться
Скачать
Canon FAXPHONE L190 Скачать руководство пользователя страница 461

4

4

4-385

4-385

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Roller (L418S/L410/L190) > Procedure

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Roller (L418S/L410/L190) > Procedure

Caution:
When assembling the pickup tray unit, check the positioning of the 6 bosses [1] in the
unit.

[1]

Removing the Pickup Roller (L418S/L410/L190)

 

■

Preparation

1) Remove the left cover
2)Remove the DADF unit and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.
6)Remove the duplex feed unit
7)Remove the separation pad
8)Remove the pickup tray unit

 

■

Procedure

1)Remove the pickup roller[1]
•  2 claws[2]

Caution:
Do not touch the surface of the roller.

[1]

Содержание FAXPHONE L190
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов