Canon F-1, Руководство по обслуживанию

Страница: 9 / 179

1
1
1-3
1-3
Product Outline > Specification > Reader
Product Outline > Specification > Reader
Specification
Following shows the specification list of this equipment.
Reader
Item Specification/function Remarks
Exposure system High-brightness white LED + reflection
plate
-
Original
scan
In BOOK mode Scan by movement of scanner unit -
In DADF mode Scan by original stream reading with
scanner unit fixed
-
Scanning resolution 600 dpi x 600 dpi SEND: 300 x 300 dpi
Gradation 256 gradations -
Carriage position detection Scanner unit HP sensor (SR2) -
Magnification change 25% to 400% Digital reproduction (Color:
in case of 300 dpi or
less, scan reproduction
(double speed scan) is also
included).
In main scanning
direction
Image processing in main controller PCB -
In sub scanning
direction
Image processing in main controller PCB Some are processed by the
reader controller PCB.
Number of line of reading
sensor
4 lines (R, G, B, B/W) -
Original
size
detection
In BOOK mode Horizontal scanning direction: detection
by reading sensor (scanner unit)
-
Vertical scanning direction: detection by
reflection sensor (original size sensor 1
(AB type) or original si ze sensor 2 (Inch
type)
-
In DADF mode Horizontal scanning direction:
detection by the original width volume/
photointerrupter on DADF
-
Vertical scanning direction: detection by
the photointerrupter on DADF
-
Maximum
original
size
In BOOK mode 297 mm x 431.8 mm -
In DADF mode 304.8 mm x 630 mm -
Power source DC 24.5V, DC 12.3V It is supplied by the
connected device.
Dimension 635 x 590 x 72 (W x D x H mm) DADF is not counted for the
height.
Weight Approx. 12 kg -
Option Reader heater -
Contents of description are subject to change due to product improvement etc.
T-1-1