Canon F-1, Руководство по обслуживанию

Страница: 125 / 179

4
4
4-49
4-49
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Back Surface of the Reading Glass > Procedure
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Back Surface of the Reading Glass > Procedure
Cleaning the Back Surface of the Reading Glass
■ Preparation
1) Removing the DADF Front Cover (Refer to page 4-39).
■
Procedure
1) Open the DADF, and slide the Reading Glass [1] in the direction of the arrow to remove it.
• 1 Claw [2]
[1]
[2]
2) Clean the back surface [1] of the Reading Glass with wet and tightly-wrung lint-free paper [2].
[1]
[2]
3) Install the Reading Glass and the Front Cover to the original positions.
F-4-129
F-4-130
CAUTION:
When installing the Reading Glass [1], slowly and carefully slide it in. If you slide it in
abruptly, the Film Sheet [2] may flip. (This will result in a jam at DADF reading.)
[1]
[2]
F-4-131