Canon EOS RP, Инструкция по эксплуатации

Страница: 657 / 841

449
Connecting to a Smartphone via Wi-Fi
o
During the image transfer operation, a picture cannot be taken even if the
camera’s shutter button is pressed.
o
The camera cannot be connected to multiple smartphones via Wi-Fi when it is
connected to another device via Wi-Fi.
o
You can cancel the image transfer by selecting
[Cancel]
during the transfer.
o
You can select up to 999 files at a time.
o
With a Wi-Fi connection established, disabling the smartphone’s power saving
function is recommended.
o
Selecting the reduced size for still photos applies to all still photos sent at that
time. Note that
b
size still photos are not reduced.
o
Selecting compression for movies applies to all movies sent at that time.
o
When you use a battery to power the camera, make sure it is fully charged.
o
With a Wi-Fi connection established, the camera’s auto power off does not
function.
Terminating the Wi-Fi Connection
To terminate the Wi-Fi connection, perform either of the following operations.
On the Camera Connect screen, tap
on [ ].
On the [
q
Wi-Fi on] screen, select
[Disconnect,exit].
z
If the [
q
Wi-Fi on] screen is not
displayed, select [Wi-Fi function] on
the [
5
: Wireless communication
settings] screen.
z
Select [Disconnect,exit] , then select
[OK] on the confirmation dialog.