Canon EOS RP, Инструкция по эксплуатации

Страница: 344 / 841

136
N
Auto Correction of Brightness and
Contrast
Brightness and contrast can be corrected automatically if shots look dark or
contrast is too low or high. This function is called Auto Lighting Optimizer.
In Basic Zone modes, [Standard] is set automatically.
1
Select [
z
: Auto Lighting
Optimizer].
2
Set a correction option.
3
Take the picture.
g
The image will be recorded with the
brightness and contrast corrected as
necessary.
o
Noise may increase and clarity may change, under some shooting conditions.
o
If the effect of Auto Lighting Optimizer is too strong and results are not at your
preferred brightness, set to [Low] or [Disable] .
o
If a setting other than [Disable] is set and you use exposure compensation
or flash exposure compensation to darken the exposure, the image may still
come out bright. If you want a darker exposure, set this function to [Disable] .
o
Maximum burst is lower with [High] . Image recording to the card also takes
longer.
o
In step 2, if you press the <
B
> button and remove the checkmark [
X
] for
[Disabled in M or B modes] setting, the [
z
: Auto Lighting Optimizer] can
also be set even in <
a
> and <
F
> modes.