Canon EOS REBEL T6i, Инструкция по эксплуатации, Страница: 183 / 414

183
Easy Wireless Flash Shooting
K
4
Select [Built-in flash settings].

Select [ Built-in flash settings ], then
press <
0
>.
5
Select [EasyWireless].

For [ Built-in flash ], select
[ EasyWireless ], then press <
0
>.
6
Set [Channel].

Set the transmission channel (1-4) to
the same one as the slave unit.
7
Take the picture.

Set the camera and take the picture
in the same way as with normal
shooting.
8
Exit the wireless flash shooting.

For [ Built-in flash ], select
[ NormalFiring ].

Setting [ E-TTL II meter. ] to [ Evaluative ] is recommended.

Even though the firing of the built-in flash is disabled when
[
EasyWireless ] is set, it will still fire a small flash in order to control the
slave unit. Depending on shooting conditions, the flash fired to control
the slave unit may appear in the picture.

Firing a test flash is not possible with the slave unit.