Canon EOS Rebel T6 W, Инструкция по эксплуатации

Страница: 80 / 114

80
The camera can reconnect to a Web service for which connection
settings have been registered. The connection to the access point only
has to be established once. You do not need to establish a new
connection for each Web service.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ].
2
Select [
m
].

Select [
m
] (Upload to Web service)
and press <
0
>.
3
Select a Web service.

Select a Web service and press
<
0
>.
 When the [ Send to ] screen (p.75) is
displayed, select a destination and go
to step 4.
4
Select [Connect].

When settings for multiple connection
destinations are registered, select
[
Choose set. ], select the connection
destination, then connect to the
destination.

Select [ Connect ] and press <
0
>.

On the confirmation dialog, select [ OK ].
 The camera will reconnect to the Web
service.
Reconnecting