Canon EOS REBEL T6 (W) Скачать руководство пользователя страница 90

Страница: 90 / 164

Shooting Movies

Still photo shooting is not possible in movie shooting mode.

shoot still photos, turn the Mode Dial to change the shooting mode.

Still Photo Shooting



Movie-related settings are under the [

], [

], and [

] tabs.



A movie file is recorded each time you shoot a movie (p.90).



The movie image’s field of view is approx. 100% (with movie recording
size set to [

]).



Monaural sound is recorded by the camera’s built-in microphone (p.84).



With a fully-charged Battery Pack LP-E10, the total movie shooting time
will be as follows: approx. 1 hr. 15 min. at room temperature (23°C/73°F),
and approx. 1 hr. 10 min. at low temperatures (0°C/32°F).



During movie shooting, focus preset for super telephoto lenses cannot
be used.

Содержание EOS REBEL T6 (W)





































































































































































Результаты поиска

Содержание EOS REBEL T6 (W)

Отзывы:

Canon EOS REBEL T6 (W), Основное руководство пользователя, Страница: 90 / 164

Результаты поиска

Содержание EOS REBEL T6 (W)

Отзывы: