Canon EOS REBEL T6 (W), Основное руководство пользователя

Страница: 137 / 164

W-21
Connecting Automatically with the NFC Function

If necessary, also read “NFC Function Cautions” (p.W-15).

When touching the smartphone to the camera, be careful not to drop the
camera or smartphone.

Do not touch the smartphone to the camera with too much force. Doing
so can scratch the camera or smartphone.

Just holding the smartphone close to the mark may not establish a
connection. Be sure to touch the mark with the smartphone so that they
come into contact with each other.

Recognition may be difficult depending on the smartphone. Touch slowly
while changing the position or rotating horizontally.

Another application on the smartphone may start depending on how you
touch. Check the position of the
p
mark, then touch again.

When touching the smartphone to the camera, do not leave anything
between the camera and smartphone. In addition, when a case is
attached to the camera or smartphone, communication may not be
possible via NFC function.

The camera cannot be connected to two or more smartphones at the
same time.

By default, the connection settings via the NFC function are saved as the
fourth setting (a setting dedicated to NFC connection) under the name
[
SET4 (NFC) ]. When you connect the camera to another smartphone via
NFC, [ SET4 (NFC) ] will be overwritten.

While connected, the camera’s auto power off does not function.