92
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
●
After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
●
When the ISO speed is fixed, screen brightness may change
depending on your specified shutter speed and aperture value.
However, screen brightness remains the same when the flash is
up and the mode is set to [ ].
●
Exposure may not be as expected when the ISO speed is set to
[AUTO], because the ISO speed is adjusted to ensure standard
exposure relative to your specified shutter speed and aperture
value.
●
Image brightness may be affected by the Auto Lighting Optimizer
(
72). To keep the Auto Lighting Optimizer disabled in [ ]
mode, press the [
] button on the Auto Lighting Optimizer
setting screen to add a [ ] mark to [Disable during man expo].
●
[ ]: Manual
●
Calculation of standard exposure is based on the specified
●
You can customize camera operation so that turning the [ ] dial
adjusts the shutter speed and turning the [
] dial adjusts the
aperture value (
●
The following operations are available when ISO speed is set to
[AUTO].
-
Adjust exposure by turning the exposure compensation dial.
-
Press the [ ] button to lock the ISO speed. Screen brightness
changes accordingly.
●
You can also adjust the setting items on the bottom of the screen
by touching an item to select it and then either touching/dragging
the bar or touching [ ][ ].
Specific Shutter Speeds and
Aperture Values ([M] Mode)
Still Images
Movies
Set the shutter speed and aperture value to obtain your desired exposure.
For details on available shutter speeds, see “Shutter” (
213). Available
aperture values vary by lens.
1
Enter [ ] mode.
●
Hold down the mode dial release button
and turn the mode dial to [ ].
2
Configure the setting.
●
Turn the [
] dial to set the shutter
speed (1).
●
Turn the [
] dial to set the aperture
value (2).
●
Press the [ ] button and turn the [ ] dial
to set the ISO speed (3).
●
When the ISO speed is fixed, an
exposure level mark (5) based on
your specified values is shown on the
exposure level indicator for comparison
to the standard exposure level (4). The
exposure level mark is shown as [ ] or
[ ] when the difference from standard
exposure exceeds 3 stops.
●
The ISO speed is determined and screen
brightness changes when you press
the shutter button halfway after setting
the ISO speed to [AUTO]. If standard
exposure cannot be obtained with your
specified shutter speed and aperture
value, the ISO speed is displayed in
orange.