81
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Changing the Noise Reduction Level
Still Images
Movies
You can choose from 3 levels of noise reduction: [Standard], [High], [Low].
This function is especially effective when shooting at high ISO speeds.
●
Press the [
] button, choose [High
ISO speed NR] on the [ 4] tab, and
then choose the desired option (
Using Multi Shot Noise Reduction
Automatically combine four images captured at once for noise reduction
superior to the [High] option in [High ISO speed NR].
1
Choose [ ].
●
Follow the steps in “Changing the Noise
Reduction Level” to choose [ ].
2
Shoot.
●
Hold the camera steady as you shoot.
When you press the shutter button all the
way down, the camera will take four shots
and combine them.
●
Peripheral illumination correction and chromatic aberration
correction cannot be applied to JPEG images already taken.
●
When using a non-Canon lens, setting the corrections to [Disable]
is recommended, even if [Correction data available] is displayed.
●
To correct RAW images, use Digital Photo Professional (
●
Noise may occur around the edges of images shot under some
conditions if you set [Peripheral illumin.] to [Enable].
●
The camera cannot be used to check the effect of correcting
chromatic aberration in RAW images. Instead, use Digital Photo
Professional (
●
Your settings are retained even after you change lenses, but
images are not corrected unless the camera has correction data
for the new lens. If [Correction data not available] is displayed in
step 2, use EOS Utility (
152) to add lens correction data to
the camera.
●
If the effect of the correction is not visible, magnify the image and
check it again.
●
The corrections are also applied when an Extender or Life-size
Converter is attached.
●
If the lens does not have distance information, the correction
amount will be lower.
●
The amount of peripheral illumination correction is slightly less
than the maximum in Digital Photo Professional.
●
The higher the ISO speed, the lower the amount of peripheral
illumination correction.
