Canon EOS M EF-M 22mm STM Kit, Инструкция по эксплуатации

Страница: 63 / 100

63
<
F
> (Handheld Night Scene)
When shooting night scenes and other scenes with multiple point-like light
sources, the camera may not be able to focus automatically. In such cases,
set the focus mode to [
MF ] and focus manually.
When shooting flash photography, if the flash fires and the subject’s
background is close enough to be illuminated by the flash or the night scene
has only few lights, the shots may not align correctly. This can result in a
blurry photo.
When shooting flash photography, if the subject is too close to the camera,
the picture may come out extremely bright (overexposure).
When using a Speedlite with automatic flash coverage setting, the zoom
position will be fixed to the wide end, regardless of the lens’ zoom position.
When using a Speedlite with manual flash coverage switch, shoot with the
flash head retracted to the wide (normal) position.
<
G
> (HDR Backlight Control)
The AF-assist beam will be emitted.
Flash cannot be used.
Note that the image may not be rendered with a smooth gradation and may
look irregular or have significant noise.
HDR Backlight Control may not be effective for excessively backlit scenes or
extremely high-contrast scenes.
When shooting subjects that are sufficiently bright, for example for normally lit
scenes, the image may look unnatural because of the applied HDR effect.
<
F
> (Handheld Night Scene), <
G
> (HDR Backlight Control)
Compared with other shooting modes, the shooting area will be smaller.
1
+
73
or
1
cannot be selected. With other shooting modes, if
1
+
73
or
1
is set, the picture will be recorded in
73
.
If you shoot a moving subject, ghost-like images of the subject may result.
The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.), flat or single-tone images, or greatly misaligned shots
caused by camera shake.
Compared to normal shooting, recording the image to the card will take
longer. During the processing of the images, [
BUSY ] will be displayed and
you cannot take another picture until the processing is completed.
You cannot use Creative filters when shooting.
Final image simulation is not available.
If the mode dial is set to <
F
> or <
G
>, direct printing is not possible. Select
other mode and perform direct printing.
COP
Y