Canon EOS C700, Инструкция по эксплуатации

Страница: 93 / 250

93
Adjusting the Focus
5 Press and hold the ONE-SHOT AF button.
• A white AF frame will appear on the monitoring screen and the camera will focus automatically. When you
are using Face AF, the face detection frame around the face of the person who has been determined to be
the main subject will turn white.
• When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,
the AF frame will turn red.
• The AF frame will disappear when you release the ONE-SHOT AF button.
NOTES NOTES
• One-shot AF will not work in the following cases.
- When slow & fast motion recording is activated.
- When the shutter speed mode is set to [Slow] and the shutter speed is set to 1/4 or 1/3.
- When Face AF is set to [Face Only] and a face has not been detected.
- When a broadcast lens (
A
221) is attached to the camera.
• When the aperture value used is F11 or higher, Dual Pixel CMOS AF will not work and the camera will focus
using contrast-detection autofocus.
Z
AF-Boosted MF
In this focus mode, you can focus manually most of the way and let the camera finish focusing automatically.
This is very convenient when you want to make certain that your 4K recordings are in sharp focus.
Additionally, with this mode, if the camera cannot evaluate how to adjust the focus, it will not perform unreliable
focus adjustments. This results in an overall smoother focusing operation than with continuous AF.
1 Set the focus mode switch on the lens to AF.
• On a compatible EF Cinema/broadcast lens, enable automatic adjustment on the lens (
A
89).
•
@
will appear on the left of the monitoring screen.
2 Open the focus [AF Mode] submenu.
Setup screen: [AF]
>
[OPTIONS]
>
[AF Mode]
Monitoring menu: [Camera Setup] (
v
)
>
[Focus]
>
[AF Mode]
3 Select [AF-Boosted MF] and then press SET.
• When the focus is in the manual adjustment range, a yellow focus frame will appear on the monitoring
screen.
4 If necessary, change the size and position of the AF frame (
A
95).
5 Turn the focus ring to adjust the focus.
• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment
range, the focus frame will turn white and the camera will then finish focusing automatically.
• While the focus stays within the automatic adjustment range, the camera will keep the subject in focus
automatically.
Z
Continuous AF
The camera will focus automatically on a subject inside the main area of the image (approximately 80% of the 2K
or 4K recording area excluding the surrounding area, when displayed).
1 Set the focus mode switch on the lens to AF
• On a compatible EF Cinema/broadcast lens, enable automatic adjustment on the lens (
A
89).
•
@
will appear on the left of the monitoring screen.