manualshive.com logo in svg

Canon EOS C700, Инструкция по эксплуатации

Поделиться
Скачать
Canon EOS C700 Скачать руководство пользователя страница 182

FTP File Transfer

182

Transferring Clips (FTP Transfer)

After connecting the camera to a network (Wi-Fi (Infrastructure) or wired (Ethernet)), you can transfer to the FTP 
server, XF-AVC Proxy clips recorded on the SD card.

1 Open the PLAY screen for sub recordings (XF-AVC Proxy) on the SD card.

 [PB MEDIA] 

>

 [SD Card (XF-AVC)]

2 Open the clip selection screen.

[OPTIONS] 

>

 [FTP Transfer]

• The last XF-AVC Proxy clip recorded will be selected.

3 Select all the XF-AVC Proxy clips you wish to transfer.

• Turn the SELECT dial to select a clip. Press SET to mark a clip for transfer (a check mark will appear next to 

the clip name). Press SET again to remove the check mark.

• You can press [SELECT ALL] to mark all the clips for transfer, or [CLEAR] to remove the check marks from 

all the clips marked for transfer.

4 Once you have selected all the desired clips, press [OK].

• All the applicable clips will be transferred to the FTP server. When using an Ethernet connection, the 

 

(Ethernet) access indicator will flash quickly while the files are being transferred.

• Press [CANCEL] to cancel the transfer while it is in progress.

5 When the confirmation message appears, press [OK].

IMPORTANT

• Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and 

incomplete files may remain at the transfer destination.
- Do not open the SD card slot cover.
- Do not remove the power source or turn off the camera.

• If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete 

before deleting them.

NOTES

NOTES

• Depending on the access point’s settings and capabilities, it may take some time to transfer files.

• You can also transfer the clip that is selected in the PLAY screen using the monitoring menu’s 

 [System 

Setup] (

B

) 

>

 [Network Settings] 

>

 [FTP Transfer] 

>

 [Activate] setting.

Содержание EOS C700



























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды