Canon EOS C70, Инструкция по эксплуатации

Страница: 22 / 215

Date, Time and Language S etting s
22
Date, Time and Language Setting s
Setting the Date and Time
You will need to set the date and time on the camera the first time you power it on, or after the camera's settings
have been reset. The [Date/Time] screen will appear automatically when the camera’s clock is not set. Refer to
Using the Menus (
A
23) for instructions on how to operate the menus.
1 S elect the de s ired time zone* u s ing the joy s tic k or the S ELECT dial, and confirm by pre ss ing the S ET
button or the joy s tic k it s elf.
• The cursor will move to the next field.
• You can also push the joystick left/right to move between the fields.
* The default time zone is [UTC-05:00] (New York) or [UTC+01:00] (Central Europe), depending on the country/region of
purchase. Time zones are based on Coordinated Universal Time (UTC).
2 Change the re s t of the field s in the s ame way.
3 S elect [ S et] and then pre ss S ET.
NOTES
• You can display the date/time with the > [
¢
Monitoring Setup] > [Custom Display 2] or [Custom
Display] > [Date/Time] setting.
• With the following settings, you can make changes after the initial setup. You can also change the date format
and clock format (12 or 24 hours).
-
> [
B
System Setup] > [Time Zone], [Date/Time] and [Date Format]
• When you do not use the camera for about 3 months, the built-in backup battery may be depleted completely
and the date and time setting may be lost. In such case, recharge the built-in backup battery (
A
195) and set
the time zone, date and time again.
• Using the GP-E2 GPS Receiver, you can have the camera adjust settings automatically according to the UTC
date/time information received from the GPS signal (
A
172).
Changing the Language
The camera’s default language is English. You can change it to German, Spanish, French, Italian, Polish,
Portuguese, Russian, Ukrainian, Simplified Chinese, Korean or Japanese. Please note that some settings and
screens will be displayed in English, regardless of the language setting.
Refer to
Selecting an Option from the Menu (
A
23) for details on how to navigate the menu to complete this
procedure.
1 S elect > [
B
S y s tem S etup] > [Language
H
].
2 S elect the de s ired language and pre ss the MENU button to clo s e the menu.