Canon EOS C70 Скачать руководство пользователя страница 18

Страница: 18 / 215

Preparing the Power

upply

NOTES

• We recommend charging the battery in temperatures between 10 ºC and 30 ºC (50 ºF and 86 ºF). Outside the

temperature range of 0 ºC to 40 ºC (32 ºF to 104 ºF), charging will not start.

• If there is a malfunction with the battery charger, AC adapter or battery, the charge indicator will go out and

charging will stop.

• For handling precautions regarding the battery, refer to

Handling Precautions

(

194).

• For approximate charging times / usage times, refer to the

Reference Tables

(

205) and

Approximate

Continuous Recording Times

(

201).

• Charged batteries continue to discharge naturally. Therefore, charge them on the day of use, or the day

before, to ensure a full charge.

• We recommend that you prepare batteries to last 2 to 3 times longer than you think you might need.

• Repeatedly charging and completely depleting a battery will eventually shorten its battery life. You can check

the battery life on the [

System Setup] status screen (

178). Fully charging the battery and then depleting

it completely will give you a more accurate reading.

Attaching the Battery

1 Turn off the camera.

2 Insert the battery all the way into the compartment as

shown in the illustration and press it gently toward the left
until it clicks.

Removing the Battery

1 Turn off the camera.

2 Holding down the BATTERY RELEASE button (

햲

), slide

the battery toward the right and then pull it out (

햳

햲

햳

햲

햳

Содержание EOS C70
























































































































































































































Результаты поиска

Содержание EOS C70

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS C70, Инструкция по эксплуатации

Результаты поиска

Содержание EOS C70

Отзывы:

Бренды по названию

Популярные бренды