Canon EOS C500 Скачать руководство пользователя страница 135

Страница: 135 / 212

135

MXF Clip Operations

Deleting

Marks from All Clips

1 Open the [Delete All

Marks] submenu.

[

Other Functions]

[Delete All

Marks]

2 Select [OK] and then press SET.

• All

marks from clips on the selected CF card will be deleted.

• Select [Cancel] instead to cancel the operation.

• While the

marks are being deleted, you can press SET to cancel.

3 When the confirmation message appears, press SET.

Copying Clips

You can copy clips from one CF card to the other. The copied clips will retain their original name.

Copying a Single Clip

1 Select the desired clip and then press SET to open the clip menu.

2 Select [Copy Clip] and then press SET.

• The clip information screen appears and it prompts you to confirm the operation. You can also check the

available space on both CF cards.

3 Select [OK] and then press SET.

• Select [Cancel] instead to cancel the operation.

• While the clip is being copied, you can press SET to cancel.

4 When the confirmation message appears, press SET.

• The selected clip is copied to the other CF card and the screen changes back to the clip index screen.

Copying All Clips

1 Open the [Copy All Clips] submenu.

[

Other Functions]

[Clips]

[Copy All Clips]

2 Select [OK] and then press SET.

• All of the clips on the selected CF card will be copied to the other CF

card.

• Select [Cancel] instead to cancel the operation.

• While the clips are being copied, you can press SET to cancel.

3 When the confirmation message appears, press SET.

Copying All Clips with an

Mark

1 Open the [Copy

Clips] submenu.

[

Other Functions]

[Clips]

[Copy

Clips]

2 Select [OK] and then press SET.

• All of the clips with an

mark on the selected CF card will be copied

to the other CF card.

• Select [Cancel] instead to cancel the operation.

• While the clips are being copied, you can press SET to cancel.

3 When the confirmation message appears, press SET.

[

Other Functions]

[Delete All

Marks]

[

Other Functions]

[Clips]

[Copy All Clips]

[

Other Functions]

[Clips]

[Copy

Clips]

COP

Содержание EOS C500





















































































































































































































Результаты поиска

Содержание EOS C500

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS C500, Инструкция по эксплуатации

Результаты поиска

Содержание EOS C500

Отзывы:

Бренды по названию

Популярные бренды