Canon EOS C300 Mark II, Инструкция по эксплуатации

Страница: 69 / 223

69
ND Filter
ND Filter
Using the ND filter allows you to open up the aperture to obtain a
shallower depth of field even when recording in bright surroundings. You
can also use the ND filter to avoid the soft focus caused by diffraction
when using small apertures. By default, you can select one of 3 density
levels (2 to 6 stops) and, if you enable the extended ND range, you can
select one of 5 density levels (2 to 10 stops).
You can also perform this function remotely using Browser Remote on a
connected Wi-Fi device (
A
120, 124).
Press the ND or
–
button to select the desired ND filter setting.
• Repeatedly pressing ND button will change the ND filter setting in the following order: [ND 2 stops]
[ND 4 stops] [ND 6 stops] [ND 8 stops]* [ND 10 stops]* ND filter off. (The ND FILTER
–
button cycles
through the settings in reverse order.)
• The selected ND filter setting will appear on the bottom of the screen and will be displayed also on the rear
panel.
* Only when [
v
Camera Setup]
>
[Extended ND Range] is set to [On].
NOTES NOTES
• If you set an assignable button to [ND +] or [ND –] (
A
131), you can press the button to change the ND filter
setting.
• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white
balance (
A
74) may be effective in such case.
• About the extended ND range: When you switch to or from a density level in the extended range (8 or 10 stops),
you may notice one or both of the following circumstances.
- The focus may shift, affecting also the indication on the lens's focus distance scale.
- Depending on the lens, the camera may not be able to focus at infinity focus.
• About changing the ND filter setting using the optional RC-V100 Remote Controller:
- When the remote controller is connected to the camera, you can use the remote controller’s ND button in
the same way as the camera’s ND button.
- For settings between 2 and 8 stops, the corresponding ND filter indicator (1 to 4, respectively) will illuminate
in orange. When the ND filter is set to 10 stops, indicators 1 and 4 will both illuminate.
Operating modes: