Canon EOS C300 Mark II, Инструкция по эксплуатации

Страница: 57 / 223

57
Recording Video
Right side of the screen
Recording operation: 2: [Recording Mode]
STBY,
Ü
REC Clip recording: record standby, recording.
INT STBY,
Ü
INT,
Ü
INT REC
Interval recording (
A
117): record standby (before the sequence has started), record
standby (once the sequence has started), recording.
• In record standby mode before the interval recording sequence has started, [INT]
flashes.
FRM STBY,
Ü
FRM STBY,
Ü
FRM REC
Frame recording (
A
116): record standby (before the sequence has started), record
standby (once the sequence has started), recording.
• In record standby mode before the frame recording sequence has started, [FRM]
flashes.
S&F STBY,
Ü
S&F REC Slow & fast motion recording (
A
113): record standby, recording.
PRE REC STBY,
Ü
PRE REC
Pre-recording (
A
115): record standby, recording.
1s - 10m00s Interval recording counter (
A
117) 2: [Interval Counter]
00.00P, 00.00i Frame rate (
A
62)
• During slow & fast motion recording, the shooting frame rate is also displayed
(000/00.00P).
2: [Frame Rate]
REC
`
, STBY
`
Output recording command (
A
185) 2: [Rec Command]
U
Genlock (
A
93) 2: [Genlock]
00:00:00.00, 00:00:00:00 Time code (
A
88) 2: [Time Code]
Icon/Display Description Custom Display
8
0000 Approximate number of photos that can be recorded on the SD card (
A
175) 2: [Remaining Photos]
YCC422 10 bit,
RGB444 10 bit,
RGB444 12 bit Color sampling (
A
62) 2: [Resolution/
Color Sampling]
0000x0000 Resolution (
A
62) 2: [Resolution/
Color Sampling]
, , Output terminals not active (
A
163) 2: [Output Terminals
Status]
T
(in red) Output onscreen displays (
A
168) 2: [OSD Output]
GPS signal (
A
108): continuously on - satellite signal acquired; flashing - satellite
signal not acquired.
• Displayed only when an optional GP-E1 GPS Receiver is connected to the camera.
2: [GPS]
Q
User memo (
A
106) 2: [User Memo]
00 00 00 00 User bit (
A
91) 2: [User Bit]
CH0/CH0 Audio output channels (
A
169) 2: [Monitor Channels]
Date/time 2: [Date/Time]
Icon/Display Description Custom Display