Canon EOS C300 Mark II Скачать руководство пользователя страница 177

Страница: 177 / 223

177

Photo Playback

You can view the photos that you took with the camera.

Displaying the [Photos] Index Screen

Display the [Photos] index screen to view photos.

1 Set the

switch to MEDIA.

• The camera switches to

mode and the clip index

screen appears.

2 Press the INDEX button.

• The index screen selection menu appears.

3 Select [Photo Index] and then press SET.

• The [Photos] index screen appears.

• When you have finished viewing photos, press the INDEX

button to return to the clip index screen.

Viewing Photos

1 Move the orange selection frame to the desired photo.

2 Press the

button to view the photo.

• The photo playback screen appears and the selected photo is displayed.

• Use the

buttons or push the joystick left/right to switch to the previous/next photo.

• Press the DISP. button on the monitor unit or an assignable button set to [Display] (

131) to hide/show

the onscreen displays.

• Press the

button to return to the [Photos] index screen.

IMPORTANT

• Observe the following precautions while the SD card access indicator is illuminated in red. Failure to do so may

result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not remove the SD card.

NOTES

• The following photos may not be displayed correctly.

- Photos not recorded with this camera.
- Image files that were created, edited or renamed using a computer.

Operating modes:

Содержание EOS C300 Mark II
































































































































































































































Результаты поиска

Содержание EOS C300 Mark II

Отзывы:

Бренды по названию

Популярные бренды

Canon EOS C300 Mark II, Инструкция по эксплуатации

Результаты поиска

Содержание EOS C300 Mark II

Отзывы:

Бренды по названию

Популярные бренды