Canon EOS C300 Mark II, Инструкция по эксплуатации

Страница: 158 / 223

Clip Operations
158
NOTES
• After you finish playing back a clip from this index screen, the index screen that was open before the [Shot
Mark] index screen will appear.
Displaying a Frame Index Screen of a Single Clip
You can display an index screen of a single primary clip recorded on a CFast card, broken down as frames at
fixed intervals. This is useful when you have a long clip or wish to play back a clip from a certain point. You can
change how many thumbnails are displayed. You can also perform other operations from this index screen, such
as adding and deleting shot marks.
1 Select a clip recorded on a CFast card and then press SET to open the clip menu.
2 Select [Expand Clip] and then press SET.
• The [Expand Clip] index screen appears, which shows thumbnails of frames taken from the clip at fixed
intervals. The time code under the thumbnail indicates the time code of the frame.
• You can change the fixed interval between frames by showing more or fewer thumbnails. To show more
thumbnails, open the clip menu and select [More Index Pics] and then press SET. To show fewer
thumbnails, select [Fewer Index Pics] and then press SET.
• Press the INDEX button or CANCEL button to return to the clip index screen.
NOTES
• After you finish playing back a clip from this index screen, the index screen that was open before the [Expand
Clip] index screen will appear.
Adding Shot Marks
You can add shot marks (
"
,
#
or both) to frames in a primary clip recorded on a CFast card that you want to
set apart. Later, you can display an index screen that shows only the clips with a
"
mark, only the clips with a
#
mark, or only clips with either shot mark.
Adding Shot Marks during Playback
To add an
"
mark or
#
mark to a clip during playback or playback pause, you must first set an assignable
button to [Add Shot Mark 1] or [Add Shot Mark 2] in advance.
1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (
A
131).
2 During playback or playback pause, press the assignable button at the point in the clip to add the
shot mark.
• A message indicating the shot mark appears on the screen and the shot mark is added to the clip.
• Adding a shot mark to a clip during playback will pause the playback.
Time code of the
frame shown in
the thumbnail