Canon EOS C100 Mark II Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 214

Canon EOS C100 Mark II Скачать руководство пользователя страница 129

129

Playback

Playback Controls

When you play back a clip, operate the buttons on the camcorder’s body or
use the joystick and joystick guide to use fast playback, play back frame-
by-frame or skip clips. Refer to the following table.

Available playback types

NOTES

• There is no audio during any of the playback types listed in the previous table.

• During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the

playback picture.

• The speed indicated on the screen is approximate.

• During frame reverse, the interval between frames is 0.5 seconds, which is longer than the interval during

frame advance.

• You can press the DISP. button to turn the joystick guide display on and off.

Adjusting the Volume

During playback, audio will come from the monaural built-in speaker or
headphones. When you connect headphones to the

×

(headphone)

terminal, the built-in speaker will be muted.

1 Open the [Headphone Volume] or [Speaker Volume] submenu.

[

¡

Audio Setup]

>

[Audio Output]

>

[Headphone Volume] or

[Speaker Volume]

2 Select the desired level and then press the joystick.

• Select [Off] to mute the audio.

Playback type

Operation

Fast playback

Buttons: Press the

Ø

or

×

button.

Joystick: During playback, push the joystick up or down.
Repeat to increase the playback speed to approximately 5x

J

15x

J

60x the normal speed.

Frame advance/reverse

Joystick: During playback pause, push the joystick up or down.

Skip to the beginning of
the next clip

Buttons: Press the

Ù

button.

Joystick: Push the joystick right.

Skip to the beginning of
the current clip

Buttons: Press the

Ú

button.

Joystick: Push the joystick left.

Skip to the previous clip

Buttons: Press the

Ú

button twice.

Joystick: Push the joystick left twice.

Return to playback mode

Buttons: Press the

Ò

button.

Joystick: Press the joystick itself.

[

¡

Audio Setup]

[Audio Output]

[Headphone Volume]

[Speaker Volume]

[8]

COP

Y

«
...
127
128
129
130
131
...
»

Содержание EOS C100 Mark II























































































































































































































Отзывы:

Нет отзывов