Canon EOS 90D, Инструкция по эксплуатации

Страница: 780 / 888

568
Custom Function Setting Items
C.Fn II-13: AF point selection movement (Viewfi nder shooting)

0: Stops at AF area edges
Useful if you often use the AF point at the outer edge.

1: Continuous
Instead of stopping at the outer edge, the selection of AF point continues
to the opposite side.
o
Also applies when the initial AF point for AI Servo AF is selected with
[
8
C.Fn II-11: Initial Servo AF pt, /
c
]
set to
[1:Initial AF pt set for /
c
]
.
C.Fn II-14: AF point display during focus (Viewfi nder shooting)
You can set whether to display the AF point(s) when AF point is selected,
before AF starts (shooting ready), when AF starts, during AF, when focus is
achieved, and when the metering timer is active after focus is achieved.
k : Displayed, l : Not displayed
AF Point Display During Focus
With AF
Point
Selected
Before
AF Starts
(Shooting
Ready)
At AF Start
0: Selected (constant)
k k k
1: All (constant)
k k k
2: Selected (pre-AF,focused)
k k k
3: Selected AF pt (focused)
k l k
4: Disable display
k l l
AF Point Display During Focus During AF
Focus
Achieved
Metering
Active After
Achieving
Focus
0: Selected (constant)
k k k
1: All (constant)
k k k
2: Selected (pre-AF,focused)
l k k
3: Selected AF pt (focused)
l k l
4: Disable display
l l l