Canon EOS 80D (W), Инструкция по эксплуатации, Страница: 243 / 526

243
3
Setting the Flash
N
For details on the external Speedlite’s Custom Functions, refer to the
Speedlite’s instruction manual.
1
Select [External flash C.Fn
setting].
2
Set the desired function.

Select the number, then press <
0
>.

Select the setting, then press <
0
>.
1
Select [Clear settings].
2
Select the settings to be cleared.

Select [ Clear built-in flash set. ],
[ Clear external flash set. ], or [ Clear
ext. flash C.Fn set. ], then press
<
0
>.

When you select [ OK ], the respective
flash settings or all the Custom
Function settings will be cleared.
External Speedlite Custom Function Settings
Clear Settings
With an EX-series Speedlite, the Speedlite will always fire at full output if the
[
Flash metering mode ] in Flash Custom Function is set to [ TTL ] (autoflash).
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [
Flash control ] screen. Set it with the Speedlite.