Canon EOS 7D Mark II (G), Инструкция по эксплуатации

Страница: 209 / 550

209
The time information obtained from GPS signals can be set in the
camera. The margin of error is approx. ±1 sec.
1
Select [Set up].
Check that [ GPS ] is set to [ Enable ].
Select [ Set up ], then press <
0
>.
2
Select [Auto time setting].
3
Select the desired setting.
Select [ Auto update ] or [ Set now ],
then press <
0
>.
[ Auto update ] updates the time when
the camera is turned on and a GPS
signal is received.
Setting Time from GPS on the Camera
If signals from at least five GPS satellites cannot be acquired, the time
cannot be auto updated. [
Set now ] will be grayed out and not selectable.
Even if [ Set now ] is selected, updating the time may not be possible due
to an unfavorable timing of the GPS signal acquisition.
When [ Auto time setting ] is set to [ Auto update ], the date or time
cannot be manually set with [ Date/Time/Zone ] under the [
5
2 ] tab.
If you use Wireless Transmitter WFT-E7 (Ver. 2/sold separately) and do
not want to change the time after performing [
Sync time between
cameras ], set [ Auto time setting ] to [ Disable ] in step 2.