background image

81

The camera analyzes the scene and sets the optimum settings 
automatically. In places where flash photography is prohibited such as 
in a museum or an aquarium, use the <

7

> (Flash Off) mode.

 

Prevent camera shake if the numeric display in the viewfinder 
blinks.

Under low light when camera shake is prone to occur, the 
viewfinder’s shutter speed display will blink. Hold the camera steady 
or use a tripod. When using a zoom lens, use the wide-angle end to 
reduce blur caused by camera shake even while handholding the 
camera.

 

Take portraits without flash.

In low-light conditions, tell the subject to keep still until the picture is 
taken. Any movement by the subject during shooting may result in 
the subject being blurred in the picture.

7

 Disabling Flash

Shooting Tips

Содержание EOS 760DW















































































































































































































































































































































































































































Отзывы: