Canon EOS 750D W, Инструкция по эксплуатации, Страница: 44 / 168

44
Register the target camera to connect to via a wireless LAN. The
camera can be connected to only one camera at a time.
1
Select [Wi-Fi function].

Under the [
5
1 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ].
2
Select [
z
].

Select [
z
] (Transfer imgs between
cameras), then press <
0
>.
 The camera’s <
k
> lamp will blink.
3
Start the connection on the target
camera.

When the screen on the left is
displayed on the camera, start the
connection on the target camera as
well. For the operation procedure,
refer to the instruction manual of the
target camera.
 When a connection is established,
the settings are saved and an image
on the card is displayed.
 The camera’s <
k
> lamp will light up
in blue.
Selecting the Connection Destination