Canon EOS 6D, Инструкция по эксплуатации

Страница: 39 / 406

39
The camera is compatible with all Canon EF lenses. The camera
cannot be used with EF-S and EF-M lenses.
1
Remove the caps.

Remove the rear lens cap and the
body cap by turning them as shown
by the arrows.
2
Attach the lens.

Align the red dots on the lens and
camera and turn the lens as shown by
the arrow until it clicks in place.
3
Set the lens focus mode switch to
<AF>.

< AF > stands for Autofocus.

If it is set to < MF > (manual focus),
autofocus will not operate.
4
Remove the front lens cap.
Attaching and Detaching a Lens

Do not look at the sun directly through any lens. Doing so may cause
loss of vision.

If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
Minimizing Dust

When changing lenses, do it quickly in a place with minimal dust.

When storing the camera without a lens attached, be sure to attach the
body cap to the camera.

Remove dust on the body cap before attaching it.