manualshive.com logo in svg

Canon EOS 6D, Инструкция по эксплуатации, Страница: 30 / 406

Поделиться
Скачать
Canon EOS 6D Скачать руководство пользователя страница 30

30

Load a fully charged Battery Pack LP-E6 (or LP-E6N) into the camera.

1

Open the cover.

Slide the lever as shown by the 
arrows and open the cover.

2

Insert the battery.

Insert the end with the battery 
contacts.

Insert the battery until it locks in 
place.

3

Close the cover.

Press the cover until it snaps shut.

Open the cover and remove the 
battery.

Press the battery lock lever as shown 
by the arrow and remove the battery.

To prevent short circuiting of the 
battery contacts, be sure to attach the 
provided protective cover (p.28) to 
the battery.

Installing and Removing the Battery

Installing the Battery

Removing the Battery

Only Battery Pack LP-E6/LP-E6N can be used.

Содержание EOS 6D























































































































































































































































































































































































































Отзывы:

Нет отзывов