manualshive.com logo in svg

Canon EOS 6D, Инструкция по эксплуатации, Страница: 218 / 406

Поделиться
Скачать
Canon EOS 6D Скачать руководство пользователя страница 218

218

You can shoot movies while recording 
sound with the built-in monaural 
microphone or a commercially-available 
stereo microphone. You can also freely 
adjust the sound-recording level.
Set the sound recording with [

Z

2: 

Sound recording

].

[

Auto

]

: The sound-recording level is adjusted automatically. Auto 

level control will operate automatically in response to the 
sound level.

[

Manual

]

: For advanced users. You can adjust the sound recording 

level to one of 64 levels.
Select [

Rec. level

] and look at the level meter while 

turning the <

5

> dial to adjust the sound recording level. 

While looking at the peak hold indicator, adjust so that the 
level meter sometimes lights up the “12” (-12 dB) mark on 
the right for the loudest sounds. If it exceeds “0”, the 
sound will be distorted.

[

Disable

]

: Sound will not be recorded.

[

Wind filter

] : When [

Enable

] is set, it reduces the wind noise 

recorded outdoors. This feature takes effect only with 
the built-in microphone.
Note that [

Enable

] will also reduce low bass sounds, so 

set this function to [

Disable

] when there is no wind. It 

will record a more natural sound than with [

Enable

].

[

Attenuator

] : Even  if  [

Sound recording

] is set to [

Auto

] or [

Manual

] 

before shooting, sound distortion may still result if there 
is a very loud sound. In such a case, setting it to 
[

Enable

] is recommended.

3

 Setting the Sound Recording

Sound Recording/Sound-Recording Level

Wind Filter/Attenuator

Содержание EOS 6D























































































































































































































































































































































































































Отзывы:

Нет отзывов