Canon EOS 6D, Инструкция по эксплуатации, Страница: 177 / 406

177
3
Setting the Flash
N
For details on the Speedlite’s Custom Functions, refer to the Speedlite’s
instruction manual.
1
Select [Flash C.Fn settings].

Select [ Flash C.Fn settings ], then
press <
0
>.
2
Set the functions.

Press the <
U
> key to select the
number, then press <
0
>.

Select the setting, then press <
0
>.
1
Select [Clear settings].

Under the [
z
2: External Speedlite
control ] tab, select [ Clear settings ],
then press <
0
>.
2
Select the settings to be cleared.

Select either [ Clear flash settings ] or
[ Clear all Speedlite C.Fn’s ], then
press <
0
>.

When you select [ OK ], the respective
flash settings will be cleared.
Flash Custom Function Settings
Clear Settings
With an EX-series Speedlite, if the [ Flash metering mode ] Custom
Function is set to [ TTL ] (autoflash), the Speedlite will always fire at full
output.
The Speedlite’s Personal Functions (P.Fn) cannot be set or canceled with
the camera’s [
External Speedlite control ] screen. Set it with the Speedlite.