Canon EOS 5D Mark III Скачать руководство пользователя

Страница: 208 / 404

208

Using AF to Focus

Focus the subject.

Aim the AF point over the subject and
press the shutter button halfway.

When focus is achieved, the AF point
will turn green and the beeper will
sound.

If focus is not achieved, the AF point
will turn orange.

Take the picture.

Check the focus and exposure, then
press the shutter button completely to
take the picture (p.198).

With the same AF method as the Live mode, human faces are detected
and focused. Have the target person face the camera.

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

When a face is detected, the <

frame will appear over the face to be
focused.

If multiple faces are detected, <

will be displayed. Use <

> to move

the <

> frame over the target face.

(Face detection) Live Mode:

COP

Содержание EOS 5D Mark III





















































































































































































































































































































































































































Результаты поиска

Содержание EOS 5D Mark III

Отзывы:

Похожие инструкции для EOS 5D Mark III

Бренды по названию

Популярные бренды

Canon EOS 5D Mark III, Инструкция по эксплуатации

Результаты поиска

Содержание EOS 5D Mark III

Отзывы:

Похожие инструкции для EOS 5D Mark III

Бренды по названию

Популярные бренды